Replacement Locks For Patio Doors at Lowe's
Replacing your patio door lock is an easy way to improve the security of you home. But, it is crucial to conduct regular maintenance and install the lock correctly.
It is essential to identify the type of patio door lock that you have to replace it effectively. The screw hole size and type of faceplate on the end will help you identify the kind of lock you are replacing.
Identifying Your Lock's Existing Lock
When deciding to purchase new hardware for your lock, it's essential that you know the distinctions between different types of locks. This will allow you to find the perfect replacement, ensuring that your home is secure and secure.
The most popular type of lock is the cylinder lock also known as pin and tumbler lock. This lock style uses a combination bottom pins springs, top pins and top pins to secure the keyhole and plug. Cylinder locks are available in different sizes. It is crucial to determine the length and width of the cylinder that you currently have before you purchase a new one.
To measure the width to determine the width, loosen the screws that keep the cylinder in place and carefully pull it out. Then, take a measurement of the distance between the outside edge of the cylinder and its inside edge and record the measurement in millimeters. Then, you can compare this number with the measurements of the new lock you're planning on purchase. This will ensure your new lock will fit in the existing door lockhole.
Another method of determining the proper size of your lock is to test it using keys. If the key slides easily into the cylinder, it's the same width as the rekey kit that you need. If the key does not slide into the cylinder your cylinder is likely to have a different keyway, and therefore cannot be rekeyed in a way that it will accept the same brand of key.
It is always best to read the instructions from the manufacturer that accompany a rekey kit, as each type of lock has its own unique set of installation requirements. It is crucial to test the new lock thoroughly following installation to ensure it operates correctly and provides maximum security. You should also pay attention to the additional features of your new lock, since they can impact its user-friendliness.
Take a measurement of the Width
A patio door lock that's not functioning properly could cause serious security issues. It is important to inspect your locks regularly and replace them if necessary. This will ensure that they're operating properly and are secure. It could be a good idea to avoid problems like a damaged latch or keyway. Lowe's offers new locks that can provide your home with the security you require, whether your existing locks are worn or damaged.
It is essential to measure the door to your patio before purchasing the new lock. This will allow you to know what size lock to purchase and avoid the possibility of purchasing an unsuitable lock. fit. To do this, you'll need to make two measurements that are the length of the backset and the depth of the case. The first refers to the distance between the edge of the lock's face to where the centre of the round hole through which the handle spindle passes through and the other refers to the depth of the lock body which can be seen from the outside of the door.
When deciding on the type of lock to choose it is essential to think about the way you intend to use your doors. For instance, if your sliding doors open horizontally, you'll have to select the top and bottom tab lock that connects to the strike plate, stopping the door from being pushed or lifted open. If your patio doors are vertically oriented, you'll need to opt for mortise locks with a spring-loaded hook latch that adds additional security.
It is crucial to note the location of the screw holes when determining the size of your lock. Certain mortise lock screws are round while others are square. You'll have to know where the keyway is. Some locks have a vertical keyway, while others have a 45-degree angle. Take upvc door locks replacement www.repairmywindowsanddoors.co.uk of the lock using your digital camera to ensure you get the correct replacement.
After you've measured now is the time to start shopping for your new patio door lock. There are a variety of top-quality products on the internet with a variety of branded options that offer sophisticated security features that will protect your home. The choice of a lock is an investment in your home's safety It is therefore essential to shop around and read reviews prior to buying. Be sure to maintain your locks regularly to avoid dirt and debris interfering with your doors.
Be sure to check the screw holes
Patio doors play a vital role in securing your home and should be examined for signs of wear and tear to make sure they're functioning correctly. As time passes the spindle and locks that connect your interior and exterior handles could require to be replaced. A durable lock is not just a barrier to unwanted entry but can also improve the efficiency of your energy, safety, and security.
There are many ways you can narrow your search for a new lock, if you don't have the right type. First, you must determine the type of keyway used. Aluminum patio doors are usually equipped with a rectangular cutout mortise lock, while E2126 or E2079 locks are set inside a recess in the frame. Uploading a picture of the lock with your digital camera can help you identify the type of lock it is.
Another method to determine the type of lock you have is by observing the screw holes. Most sliding patio door locks have screw holes that align with the latch keeper that is mounted on the side jamb, but they're not always the same. For example certain screws are longer than others and might have an alternative threaded end. Some screws are equipped with washers or a hexagonal nut, which can change the way they fit into the lock's hasp.
Once you have a clear idea what type of lock you own it's time to begin planning to install the new one. You'll need to clean the lock with a damp cloth or brush to remove any dirt that may hinder its operation. After you've cleaned the lock, apply a silicone-based lubricant to ensure that the locking mechanism is smooth and quiet.
After that, it's a great idea to replace the old screws with longer ones. This will give you more grip and make it easier to install the new lock. Once you've finished it's a good idea test the handle and see how the latch engages inside the lock.
If the hasp doesn't engage it, you may need to add a washer or hex-nut to it to allow it to catch more of the door's lip. You can place a shim on the side of the lockkeeper on the jamb and see if that helps.
Check the Lock Snib
The snib, or mechanism for locking, is located inside the door handle. The snib can be engaged and disengaged to open or close your patio doors, and is the first thing you need to look at if your locks aren't working correctly. Also, you can check the keepers (located at the top and bottom of the door frame) for looseness or misalignment that could cause them to break. Make sure that your snib is properly seated and that the lock isn't jammed or blocked in any way.
The most popular patio door locks are steel mortise latches that secure your sliding glass doors. Installed into the door frame, they come in many styles and are an effective security measure. Some are designed to accommodate keys, while some use an oval-shaped cutout for simple locking and unlocking.
Another option that is popular is a step-on lock with a thumb screw that will securely hold your sliding doors in place without requiring you to turn the knob or use the key. These locks are usually found on older doors with metal frames however they can be used to secure vinyl or wooden-framed sliding door frames.
When you examine your existing patio lock, take note of the type and size screw holes used to mount the escutcheon and lock body. This will allow you to select an alternative lock that has the appropriate screw holes to fit your specific patio door hardware. It's a good idea to check your strike plate and make sure it's securely secured.
If you own Jason Windows boltlock sliding doors from 2000-2009, make sure the keeper screws are secure and not loosened or missing. The screws keep the snib in a partially opened "vent" position to allow airflow, but also encourage security, and are important to prevent the lock from breaking. It is also a good idea that all locks be inspected regularly and cleaned frequently to prevent debris, dirt, corrosion or dust from hindering the operation of the lock.
If your snib has broken, it may be possible to simply replace the entire strike plate and snib assembly. However, if your snib is just wrongly aligned, you can fix it yourself by taking off the strike plate using a putty knife and backing out the adjustment screw (located above and below the screw) to move the strike plate upwards or down until the engagement tongue lines up with the Milgard logo on the snib.